HP Probook Laptop charger (Europe to US)?
Hey everyone. To make a long story short, I recently acquired an HP Probook 4520s from a relative who was living over in Europe for a little while. It has been given to me, but obviously the power adapter (charger) for the laptop itself can only plug into the 220v outlets that are the norm for homes in Europe. I obviously can't charge it at the moment so I was wondering what the options were to get it charged and running again. My first thought was that it might be possible to order the same charger off the HP site as since it's the same Laptop, could I possibly find a charger that works with the computer, but plugs into the 110v outlets we have over here in the US? Another option I noticed was that of a universal charger, but I'm unsure on what I would need to be aware of before buying one of those. A third option I saw was that of a voltage converter, but I'm not very knowledgeable on this subject either, so I would appreciate any information someone could give me on this issue. My hope was one of the first two options, but I'm not exactly sure where to look really. Haha, anyways, thanks for the help in advance everyone. Wow. Thanks to everyone who replied to my question so fast. xD Anyways, I found out that the power cord is detachable from the adapter unit itself. I'm pretty sure that it is an HP 65W Smart AC Adapter, judging by the 65W in white text near the bottom of the unit. The input reads: 100-240v So, if I'm not mistaken, that would mean that the charger will accept being plugged into both 110v or 220v outlets right? If that's the case, then all I need to do is go out and buy a power cord that I can attach to the charger correct? My real question here though, is that if the charger is capable of adjusting itself to the different voltage amounts. Or, because the input reads as above, it's not voltage specific and can work being plugged into either outlet choices. Sorry to ask so many questions, I want to be safe and not blow the charger and such. Haha, thanks again in advance.
Laptops & Notebooks - 4 Answers
People's Answers, Critics, Comments, Opinions :
Answer 1 :
I believe that all that you need is to replace the power cord that attaches to the power adapter. Virtually all of the power adapters are autosensing whether you are plugged into 110/60 or 220/50 power. If the power cord is detachable from the power adapter (the block) contact hp, or you might get lucky and find one at a computer store or repair shop, for a replacement power cord. If not, Kensington makes good universal adapters that offer ac power, 12v automotive, and airline power. Have two in use daily for a couple of years. Good Luck
Answer 2 :
read the back of the charger and see what the input voltage is, its usually 110v - 240v. if it is this you just need to buy the lead that goes from the charger to the wall (if it has a lead that pulls out of the charger, most of them do)
Answer 3 :
Hello Frederik, Great question. A lot of people wonder about this but they don't ask about it. Absolutely. Since US outlets are between 110v-220v, its a good idea to get a charger from the US. As for the charger's connector, its also a good idea to buy one for the same laptop in the US. The reason behind this is because the outlets are different (I'm sure you are aware of that) and getting a new charger in the US will match the outlets without a problem. You can search sites like ebay or amazon but I would recommend you visit Topmic. Topmic is well known for their great services and durable products. They include free shipping and free lifetime warranty. They definitely worth it, you should give them a visit. Heres the charger you were looking for: http://www.topmic.com/hp-probook-4520s--4720s-charger.html Best of luck.
Answer 4 :
Hi Frederik Take a look at the pdf below,especially the Tech.Specs.at the end.The acceptable power input range for the system runs from 100V A/C to 240V A/C. You'll need to replace the A/C adapter with one based on U.S. usage,be sure to provide the vendor you choose with the model & serial number of your machine.Also,somewhere on the bottom will be a sticker that lists power requirements.You want the standard 110/115V,for U.S. input,and make sure to match the listed A/C voltage output.It would be easiest,but somewhat costlier to order from HP,this won't be a new situation for them.
Read more discussions:
